For monitoring railway tracks
where there is surrounding building work e.g. bridge and tunnel
construction, pressure grouting of railway lines, etc. The
adapters are simply bonded to the track using the special
RSMK-FIX adhesive. Seeexamples of use
in Point 3. railway tracks.
Measuring and monitoring are possible from almost any angle and
at locations which are difficult to access.
Roads no longer need to be closed or obstacles crossed as every
measurement point can be checked from a distance of up to
200m(range depends on the measurement equipment).
3-dimension monitoring of bridges.
Simple and quick measurement of buildings, facades, supporting
structures, pillars, high rack storage facilities, dams and much
more.
For monitoring formwork during the concrete work, e.g. in the
case of bridge arches and single-faced wall formworks.
For monitoring earth and rock movements – e.g. up steep ascents
or along cliffs.
Enables measurements and
monitoring to be carried out from almost any angle, in cramped
conditions and at locations which are difficult to access.
The clip system allows the
original measurement point to be restored both quickly and
cheaply in the event of damage.
Many measurements can be carried
out within a short time when used with current total stations.
Drilling is no longer required, as
pre-installed anchor sleeves for DW15 threads can be used for
mounting.
Anchor sleeves can be used during
the construction phase for measurement points, e.g. above and
below the bridge bearing, in the case of supporting structures
and in many more applications.
Please note:
Adapter with target reflectors are exclusively
recommended for carrying out distance measurements using a
tachymeter or total station.