Plastic housing which can be rotated and swivel through 360°
RS192 with 20 x 20 mm target mark
BR193 with reflective 30 x 30 mm target mark

Can be quickly and easily stuck even to difficult surfaces, e.g. glass and marble façades, historic buildings, steel girders, gas and oil pipelines, etc. or can be fixed using plugs and screws. The base plates are also available in a magnetic design for easy fixing to steel fabrications.

The following accessories are offered for both products (see right):
resumption point (Item RSFP-X90)
protective cap with or without magnetism (RSPC10 and RSPC10M)

The RS192 target marks

are used for positioning the following devices:

  • Leica 3D Disto
  • Geomax Zoom 3D
  • Flexijet 3D

We recommend the use of the magnetic version (RS192M). With this version you can, in addition, use the resumption point RSFP-X90.

The reflective RS193 target marks

When using tachometers and robotic total stations

  • the reflective target can always be aligned accurately with the measuring instrument
  • the reflective target can be turned in a radius of 360° making it possible to use the same survey point from all directions
  • when using the fixed point RSFP-X90, the targets can be removed and later replaced on the same survey point
  • when using the protective cap RSPC10 and RSPC10M, the reflective targets can be protected against dirt

Range approx. 80 metres
offset: 0
Height of tilting axis: 45 mm


b_200_150_16777215_00_images_RS193_rs193rm_echelsbacher_Bruecke.jpg b_200_150_16777215_00_images_RS193_rs193rm_echelsbacher_Bruecke_01.jpg b_200_150_16777215_00_images_RS193_rs193rm_echelsbacher_Bruecke_02.jpg
b_200_150_16777215_00_images_RS193_rs193rm_echelsbacher_Bruecke_07.jpg b_200_150_16777215_00_images_RS193_rs193rm_echelsbacher_Bruecke_08.jpg b_200_150_16777215_00_images_RS193_rs193rm_echelsbacher_Bruecke_09.jpg
b_200_150_16777215_00_images_RS193_rs193rm_echelsbacher_Bruecke_06.jpg b_200_150_16777215_00_images_RS193_rs193rm_echelsbacher_Bruecke_03.jpg b_200_150_16777215_00_images_RS193_rs193rm_echelsbacher_Bruecke_04.jpg
b_200_0_16777215_00_images_RS193_Bohrlafette1.jpg b_200_0_16777215_00_images_RS193_Bohrlafette7.jpg b_200_0_16777215_00_images_RS193_Bohrlafette5.jpg


RSFP-X90 With resumption point RSFP-X90, reflective targets or mini prisms can always be repositioned in exactly the same place.

Magnets in the base plate hold the reflective target or mini prism precisely on the desired spot.

The resumption point is made of special stainless steel which reacts to magnets.


Plastic cover RSPC10 protects prisms/reflective targets against dirt.

Magnetic protective cap RSPC10M is available for hard to reach points, on tunnel roofs for example.

Protective cap RSPC10M can easily be removed from the prism and replaced using metal cube RSPC50.

METAL CUBE RSPC50 with 5/8' thread


Metal cube RSPC50 is screwed onto a prism rod using the 5/8' thread. This makes it easy to remove and replace the magnetic protective caps (RSPC10M) from the plastic housing – even in difficult positions.